Top 3 Reasons to Choose Multiload II+
Tuesday, March 25, 2025
When a preset goes offline, it’s not just the fuel that isn’t flowing.
Your revenue and business operations could be impacted, as well, leaving you at the back of the line.
Multiload II+ is the most powerful, most reliable load rack solution in the industry, engineered to adapt as your fuel blending needs change, so you can drive your business with confidence.
1. Feel Confident
Load and blend fuel products and recipes at a terminal bay, barge, rail, pipeline or LACT skid
- Supports up to 12 loading arms per bay, up to 5 meters & 16 additives per loading arm
- Delivers ratio, side stream, sequential, disproportional, hybrid and our innovative “routing layer” blending which decreases loading time
Secure access to the load rack, encrypt data during transfer and provide disaster recovery
- Secures the load rack with an optional integrated card reader and security groups
- Supports disaster recovery with automatic configuration backups to quickly recover from an unplanned outage
- Features data encryption using Secure Socket Layer (SSL) to enhance security
Access data for SCADA/DCS systems
- Uses Modbus protocol to connect to SCADA and DCS systems
2. Save Time
Increase biofuels output by using blend routing
Respond to new blend requirements more efficiently using blend routing. Why?
- Sequential blending can double the load time
- Ratio blending is limited by the physical meter size assigned to a component.
Instead, Multiload II+ uses a “routing layer” to connect the blend component to any meter on the loading arm. When blend ratios change, you can route the component to larger meters to decrease load time.
Flexibly add or change blends, meters, bay arms, components or additives
- Adapts to most customer requests, using Boolean & custom logic
- Saves money over competing presets, where adding more than 5 meters requires you to purchase, install and maintain a new preset
- Flexible modular design. To add a meter or component, simply add an FCM and configure the firmware
Reliable preset with responsive technical support and shorter lead times
- Less than a 3% product failure rate since 2021
- 4 to 6 weeks average delivery lead time (ARO)
- Toptech has maintained a Net Promoter Score (NPS) of 82.5% since 2023
3. Save Money
Integrate with your TAS and back-office ERP
- Open architecture allows you to integrate with other Terminal Automation Systems (TAS) or ERP
- Integrates seamlessly with Toptech Systems’ TMS7
- Network support for ethernet (TCP/IP) or serial
- In standalone, supports NTP, FTP or email
- Toptech has maintained a Net Promoter Score (NPS) of 82.5% since 2023
Lower your total cost of ownership
- Larger, more resilient display screen and durable keypad increases hardware reliability
- Easier to maintain with web interface diagnostics and free self-serve firmware available off the website
- A single Multiload II+ can replace several separate hardware components and devices with a single interface to a TAS system. Modular architecture makes it easier and less expensive to adapt flexibly to new business requirements
Adapts to changing business needs with custom logic and Modbus communication instead of adding new presets or a PLC
- Respond to new opportunities using Multiload II+ custom logic and Modbus communication instead of expensive hardware re-engineering work.
- Avoid purchasing, installing and maintaining extra presets when you need an additional meter. In a constantly changing environment, hitting the hardware limit can be costly and complicated.
Scale your operation, integrating an ecosystem of Toptech System solutions from the load rack to the back office
Toptech is the only provider to support the entire terminal ecosystem, offering a wide range of flexible and integrated solutions from the load rack to the back office.
Enclosure. The Multiload II+ enclosure has increased corrosion resistance to address salt exposure and marine applications. In addition, the bottom mounting and conduit entries are identical to the Multiload II enclosures for easy replacement. The unit also includes removable mounting feet.
Card reader. The external, side mounted non-captive reader assembly is designed to easily accommodate proximity cards or other access control technologies in the future.
Next steps?
Ready to learn more about Multiload II+? Contact us now for a demo and an ROI report to see how much Toptech Systems can save your organization.
Toptech Systems is a proud member of the global IDEX family which is recognized as the premier provider of Fluid and Metering Technologies, Health and Science Technologies, Fire and Safety Products, and Dispensing Equipment.
ABOUT US
MARKETS
PRODUCTS
Toptech Systems, Inc.
1124 Florida Central Pkwy
Longwood, Florida 32750
+1 (407) 332-1774
Toptech Systems NV
Nieuwe Weg 1 – Haven 1053
B-2070 Zwijndrecht / Belgium
+32 (0)3 250 60 60